Travels

X axis [mm (inch)]  500 (19.7)

Y axis [mm (inch)] 400 (15.7)

Z axis [mm (inch)] 300 (11.8)

Distance between table top and spindle nose end [mm (inch)] 180 ~ 480 (7.1 ~ 18.9)

Table Work area size [mm (inch)]n 600 x 400(23.6 x 15.7)

Max.loading capacity (uniform load) [kg (lbs)] 250 [300] (551 [661])*6

Spindle speed [min-1]

• *1Actual tool weight differs depending on the configuration and center of gravity.The figures shown here are for reference only.

• *2Spindle motor output differs depending on the spindle speed.

• *3Measured in compliance with ISO standards and Brother standards.

• *4Brother specifications apply to the pull studs for CTS.

• *5Measured in compliance with JIS B6336-9 and MAS011-1987.

• *6Acceleration must be adjusted for X and Y axes.

• *7When using high accuracy mode B.

• *8Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommended value.

• *9The machine needs to be equipped with a relocation detection device depending on the destination. Machines equipped with a relocation detection device come with “RD” at the end of the model name

************************* The machine including 4 axis *************************